TEKRAM TECHNOLOGY COMPANY, LTD. DC-300B, DC-800B Data bus: 16-bit ISA Size: Half-length, full-height card Hard drive supported: Up to seven SCSI devices Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB [Image] CONNECTIONS Function Location 50-pin SCSI-2 connector - external CN1 50-pin SCSI connector - internal CN2 34-pin cable connector - floppy drive CN3 4-pin connector - drive active LED JP1 4-pin connector - speaker JP2 USER CONFIGURABLE SETTINGS Function Location Setting » Floppy drive enabled JP3/jumper 1 closed Floppy drive disabled JP3/jumper 1 open BASE I/O ADDRESS Address JP3/jumper 2 JP3/jumper 3 JP3/jumper 4 » 330h closed closed closed 130h open open closed 134h open open open 230h open closed closed 234h open closed open 334h closed open closed CACHE DRAM CONFIGURATION (FOR DC-800B ONLY) Size Bank 0 Bank 1 512KB (2) 256K x 9 NONE 1MB (2) 256K x 9 (2) 256K x 9 2MB (2) 1M x 9 NONE 2.5MB (2) 1MB x 9 (2) 256K x 9 4MB (2) 1MB x 9 (2) 1MB x 9 8MB (2) 4MB x 9 NONE 8.5MB (2) 4MB x 9 (2) 256K x 9 10MB (2) 4MB x 9 (2) 1MB x 9 16MB (2) 4MB x 9 (2) 4MB x 9 Note: Bank 0 must be installed. SIMM’s must be the same size in the same bank and can be mixed in any combination not exceeding 16MB. MISCELLANEOUS TECHNICAL NOTES The only difference between DC-300B & DC-800B is the Cache DRAM capability in DC-800B. Remove terminators only when both internal & external devices are connected to this adapter.